Showing posts with label 5ghz. Show all posts
Showing posts with label 5ghz. Show all posts

Sunday, February 24, 2013

NETGEAR WNHDEB111-100NAS Wireless N Access Point Review

NETGEAR WNHDEB111-100NAS Wireless N Access Point
Average Reviews:

(More customer reviews)
I bought this kit to send HD video from my computer to my TV media device. It has adequate bandwidth and worked out of the box, but I do not get a strong signal from the main floor to the basement of my house, a distance of about 25 feet. There are a couple of walls as well as the floor, and the basement ceiling has metal duct work and pipes above the plasterboard, so I am probably lucky to penetrate all that. I used a laptop to indicate wireless signal strength, and spent a couple of hours orienting each device for the best signal. Now I get a level that varies from 50% to 70%, and that works reliably for HD at 720p. I have not been able to send 1080i over the link without momentary stops and starts in the audio and video; however the link never breaks connection and never needs resetting. It seems to just limit the bandwidth as the signal strength goes lower.
I bought a third WNHDE 111 to connect to another computer, and than link has never been interrupted since I installed it over a month ago. It has always worked well. I had previously used a Linksys G router that was interrupted once or twice a day, and it had to be reinstated manually using the "repair" function in the Windows wireless software. It was my wife's computer in the kitchen, so I had to fix it!
I still have the wireless G system up, and it works well around the house with a third computer, a laptop, but it never gave a reliable signal for my wife's computer in the kitchen; and it would not carry the HD video for the TV. I also use that old G router to connect the ethernet from my main computer to the WNHDE 111.
I recommend this device if you don't have too many walls and floors to penetrate. I am a retired electronics engineer, and I assure everyone that the higher the frequency, the poorer the penetration, but the more bandwidth and the more freedom from interference.
Update: After 7 months, I have better results. With some tweaking of the settings (set the Channel Width to 20 MHz, turn off the "Broadcast SSID", and lower Beacon Period to 50 msec) I can now stream 25 Mbps HD video through all the walls. I think the main problem was that the auto 20/40 Channel Width was trying to run at 40 and was not successful, sometimes switching between 20 and 40. When I reduced the channel width, I got an increase in signal strength. I can now stream 1080i HD for hours without any problem.
Jim

Click Here to see more reviews about: NETGEAR WNHDEB111-100NAS Wireless N Access Point

The NETGEAR HD/Gaming 5 GHz Wireless-N Networking Kit WNHDEB111 enables super-fast file transfers at the highest possible Wireless-N speeds, making it an ideal solution for network gaming and streaming HD videos. By utilizing patented metamaterial antenna technology, the WNHDEB111 offers a speed and range far surpassing the old Wireless-G standard.
Easy Setup The WNHDEB111 kit includes two access point/bridges, preconfigured to securely connect to each other. Setting it up is as easy as connecting one access point to your router/gateway, and connecting the other to your networkable device, such as your XBox, Playstation, Wii, TiVo HD, Slingbox, digital set-top boxes, NETGEAR's Digital Entertainer HD, Apple TV, network attached storage, and more. Setup is easily and securely done with a simple "Push 'N Connect" feature using Wi-Fi Protected Setup (WPS), which eliminates the need to remember or input security password keys. It automatically configures to access point or bridge mode depending on the type of Ethernet enabled device it connects to.
To add another HD Bridge to your HD network, the NETGEAR 5 GHz Wireless-N HD Access Point/Bridge is available.
Minimal Interference = Outstanding Performance Most wireless devices today, such as Wi-Fi devices, cordless phones, Bluetooth devices, microwaves, and baby monitors, operate on the 2.4 GHz frequency, thus creating a lot of traffic and interference. The WNHDEB111, however, operates on the 5 GHz band which has up to 23 free channels and avoids the interference that most other devices must contend with.
The WNHDEB111 complies with the latest Wireless-N draft specification for the fastest possible Wireless-N speeds. Automatic Quality of Service (QoS) ensures lag-free gaming and jitter-free HD streaming. It supports wireless "ad-hoc" mode for wireless LAN peer-to-peer gaming and supports multicast point-to-multi-point HD video streaming.
The WNHDEB111 supports WiFi Protected Access (WPA2-PSK, WPA-PSK), and 64-bit and 128-bit WEP encryption and is backed by a 1-year warranty.
What's in the Box Two 5 GHz Wireless-N HD Access Point/Bridges, two stands, two Ethernet cables, setup CD, two power adapters, and warranty/support information card.


Buy Now

Click here for more information about NETGEAR WNHDEB111-100NAS Wireless N Access Point

Read More...

Thursday, May 31, 2012

NETGEAR 5 GHz Wireless-N HD Access Point/Bridge (WNHDE111) Review

NETGEAR 5 GHz Wireless-N HD Access Point/Bridge (WNHDE111)
Average Reviews:

(More customer reviews)
Old Setup
Netgear WGT624NAv3 (G - 108Mbs)
Netgear WGPS606 (Print Server/Bridge 54 Mbs)
New Setup
Netgear Rangemax WNDR3700
Netgear WNHDEB111
Background:
I honestly hated Netgear. The nightmares I had with my old setup were terrible. I constantly had to reboot the router; the bridge required me to reconnect wireless devices in a certain order every time; my fiance's Apple never stayed connected long; bittorrent, VPN and video streaming knocked the router out the few times it was working; and the customer service is just horrible. I swore I'd never buy another Netgear product, but I finally had to buy something that would at least work for my fiance. I waited a few months for 802.11n to mature a bit, and was going to get the DLINK DIR-655. Recently it's had horrible firmware issues though and the other brands had low reviews. Then along came the WNDR3700.
The reviews were great so I picked it up and this bridge. I fully expected it to work as badly as my previous Netgear products, but I felt I had to give it a shot.
Conclusion:
I've had this product connected to my WNDR3700 for two days now and it works flawlessly. I have had many wireless setups and this is the best I've ever seen. I've seen people complain that it's on the 5Ghz frequency only, but it works great. All of my other systems are wired or on the 2.4Ghz frequency so I have very little overlap. Of course the WNDR3700 is dual-band so that may not be the same for everyone. I will update this if anything changes but for now I'm extremely happy. It could work at half the speed it does and I would still be happy to have something that just works for once.
Update:
Everyone in my home has problems with the iphone and this router. We constantly get disconnected. It's a known issue on their forums. There is a recent update that helps a lot but almost everyday I still lose my connection and have to re-enter my password. Otherwise this router is still working amazingly. I've only had to reset it one time.
Update:
The last update pretty much fixed the iphone issues. I rarely have to reconnect my phone anymore. If you plan on using the USB storage part of the device though I'd recommend reading the Netgear forums. Some people have had some issues with this.

Click Here to see more reviews about: NETGEAR 5 GHz Wireless-N HD Access Point/Bridge (WNHDE111)

The NETGEAR WNHDE111 5 GHz Wireless-N HD Access Point/Bridge lets you create a 5 GHz Wireless-N access point by simply connecting it to an existing router/gateway. The resulting wireless network lets you transfer data at the highest possible Wireless-N speeds, making it an ideal solution for network gaming and streaming HD videos. By utilizing patented metamaterial antenna technology, the WNHDE111 offers a speed and range far surpassing the older Wireless-G standard.
Easy Setup Simply connect the WNHDE111 to your router/gateway. Setup is easily and securely done with a simple "Push 'N Connect" feature using Wi-Fi Protected Setup (WPS), which eliminates the need to remember or input security password keys. The device automatically configures itself to access point or bridge mode depending on the type of Ethernet enabled device it connects to.
You can easily extend your wireless network by purchasing more WNHDE111 units, or start with the NETGEAR HD/Gaming 5 GHz Wireless-N Networking Kit.
Minimal Interference = Outstanding Performance Most wireless devices today, such as Wi-Fi devices, cordless phones, Bluetooth devices, microwaves, and baby monitors, operate on the 2.4 GHz frequency, creating a lot of traffic and interference. The WNHDE111, however, operates on the 5 GHz band, which has up to 23 free channels and avoids the interference from most other devices.
The WNHDE111 complies with the latest Wireless-N draft specification for the fastest possible Wireless-N speeds. Automatic Quality of Service (QoS) ensures prioritization of voice, video and gaming traffic. It also supports wireless "ad-hoc" mode for wireless LAN peer-to-peer gaming and supports multicast point-to-multi-point HD video streaming.
The WNHDE111 supports WiFi Protected Access (WPA2-PSK, WPA-PSK), and 64-bit and 128-bit WEP encryption and is backed by a 1-year warranty.
What's in the Box WNHDE111 5 GHz Wireless-N HD Access Point/Bridge, stand, Ethernet cable, setup CD, power adapter, and warranty/support information card.


Buy Now

Click here for more information about NETGEAR 5 GHz Wireless-N HD Access Point/Bridge (WNHDE111)

Read More...