Showing posts with label playstation 3. Show all posts
Showing posts with label playstation 3. Show all posts

Friday, March 22, 2013

Mediabridge Ultra Series - High Speed HDMI Cable with Ethernet - Category 2 Certified - Supports 3D & Audio Return Channel - (10 Feet) Review

Mediabridge Ultra Series - High Speed HDMI Cable with Ethernet - Category 2 Certified - Supports 3D and Audio Return Channel  - (10 Feet)
Average Reviews:

(More customer reviews)
OK, not much you can say about a cable, unless you get one that is bad or "flakey" from a problem with the shield, as we read from a previous posting.
I recently upgraded my HDTV system and now have a HDTV, Blue-ray, and Receiver that supports the HDMI 1.3 spec. This spec enables new high bandwidth features previously not supported in older HDMI cables and equipment. Both the Blue-ray and the HDTV, and my Roku-Netflix box are firmware upgradeable, so this cable should support their enhancements for at least a couple of years.
Being the quintessential anal-retentive Electrical Engineer, I tend to over analyze everything (even if not required). When buying cables (typically, the weak link in most systems), you have to determine if the product is manufactured from a reputable vendor, or built by a couple of guys in their garage, with no quality control. Mediabridge Products is a subsidiary of Broadband Products, Inc. Broadband Products has HDMI certification (see hdmi.org for why this is important).
There are two types of HDMI cable, Standard (Category 1) and High Speed (Category 2), and they have different performance metrics. A Standard cable can transmit a 1080i signal for 15 meters (49 feet) or more, while a High Speed HDMI cable can transmit a 1080p signal for at least 7.5 meters (25 feet). For the most part, running cables less than 5 meters, either will work, but I want to make sure and this cable is Category 2.
Why did I buy this specific cable from this vendor: The vendor has an almost perfect feedback record, the product is low cost for the specs, fulfilled by Amazon, and importantly free shipping, and a return policy that pays the shipping for returns/exchanges of defects.
ADK


Click Here to see more reviews about: Mediabridge Ultra Series - High Speed HDMI Cable with Ethernet - Category 2 Certified - Supports 3D & Audio Return Channel - (10 Feet)



Buy NowGet 82% OFF

Click here for more information about Mediabridge Ultra Series - High Speed HDMI Cable with Ethernet - Category 2 Certified - Supports 3D & Audio Return Channel - (10 Feet)

Read More...

Wednesday, March 20, 2013

Blue-Wave Infrared Remote For PS3 Review

Blue-Wave Infrared Remote For PS3
Average Reviews:

(More customer reviews)
allows you to use Harmony One remote to control Blu Ray DVD watching on your Sony playstation 3!!!!!

Click Here to see more reviews about: Blue-Wave Infrared Remote For PS3



Buy Now

Click here for more information about Blue-Wave Infrared Remote For PS3

Read More...

Friday, March 15, 2013

HDMI Cable 2M (6 Feet) Review

HDMI Cable 2M (6 Feet)
Average Reviews:

(More customer reviews)
I got this HDMI cable for under $10 with shipping just to see whether it will work as well as the expensive ones and it was well worth the risk. I tested it with my upconverting LG DVD player on 1080i resolution on my 42" 1080p Westinghouse LCD TV (update 2009: now used for Blu-ray from PS3 to 46" Sony LCD TV) and it works just like any other HDMI cable, including those loud names who charge you ten-fold for "golden plated extra special micro gravity nanotechnology space age wireless high conductivity low noise extra gauge supercalafragilisticexpialidocious" cables with no difference in performance. By buying this cable I avoided the huge "naive citizen tax" included in these products. Considering its price, this is an amazingly good cable.

Click Here to see more reviews about: HDMI Cable 2M (6 Feet)


Need an HDMI cable? Get reliable signal transfer for your HD video/audio without spending a fortune--complete with a lifetime warranty--with this six-foot HDMI cable from Inspiritech.
Get reliable signal transfer for your HD video/audio without spending a fortune.

Buy NowGet 96% OFF

Click here for more information about HDMI Cable 2M (6 Feet)

Read More...

Monday, March 11, 2013

CleanDr Blu-ray Lens Cleaner Review

CleanDr Blu-ray Lens Cleaner
Average Reviews:

(More customer reviews)
This cleaning disc worked great, and for $21.37 tx incl. less than the same disc at Best Buy. I wanted something that would work without a hitch and this disc delivered. We have three PS3 gaming consoles with two in a couple bedrooms and the newest 320GB in the family room. Without a doubt, the difference before and after cleaning was awesome. And it took only a minute or so to complete on each console. The Digital Innovations CleanDrx Laser Lens Cleaner for Blu-Ray is well worth the money. I'm for sure a believer now!

Click Here to see more reviews about: CleanDr Blu-ray Lens Cleaner



Buy NowGet 48% OFF

Click here for more information about CleanDr Blu-ray Lens Cleaner

Read More...

Maxell BR-GAME Blu-ray Game Lens Cleaner Review

Maxell BR-GAME Blu-ray Game Lens Cleaner
Average Reviews:

(More customer reviews)
I bought Hurt Locker & Avatar, and they wouldn't play on either my PC BluRay or Vizio BluRay player ... thought it was protection, but then a friends system worked fine ... I *ALMSOT* put in my DVD (with brushes) cleaner, but luckily didn't see BluRay and checked first ... DON'T USE BRUSH-based CLEANERS on your BluRay system.
This vortex-based system cleaned both the PC and Vizio (and PS3) systems, and everything played fine ... I HIGHLY recommend this cleaner, if you have a BluRay sytem.

Click Here to see more reviews about: Maxell BR-GAME Blu-ray Game Lens Cleaner



Buy NowGet 53% OFF

Click here for more information about Maxell BR-GAME Blu-ray Game Lens Cleaner

Read More...

Sunday, March 3, 2013

Accell) B041C-025B-43 CL3 UltraAV HDMI/HDMI Cable (25 Feet/7.5 Meters) Review

Accell) B041C-025B-43 CL3 UltraAV HDMI/HDMI Cable (25 Feet/7.5 Meters)
Average Reviews:

(More customer reviews)
This is a great HDMI cord, however it is not perfect (no cord is perfect, but this comes as close to it as you can), let me explain. To achieve a great setup you need two things, one is a great cord that is capable of delivering the signal throughout its length and a transmitter (cable box) that produces a signal strong enough to reach the full length run of cord. There are many 50' cords that claim they can deliver the true signal throughout their length, not alone a 65' cord like this one, but 99% are lying or using such a strong signal it would be impractical to replicate in a residential setting. This cord is thick and made of high quality materials and is not easy to bend at first but it'll come around after a little unrolling and unraveling. I, like many people didn't want to spend a lot of money on a chord because a cheap ($3.00) 6' cord will work just as well as an expensive ($50.00) 6' cord. I have many cheap short cords myself. Anyway so you say to yourself isn't it the same for a 50' cord, no and let me explain why. The longer the cord is the more the cord has to resist degrading over the run so the cord has to start out with a better signal in the beginning. This is accomplished by making the cord of higher quality materials (example: better copper, thicker copper 24 gauge, better shielding, etc.) so when it reaches the other end this signal has degraded so minimally that it is unnoticeable (this would be unrealistic in normal inexpensive cords of over 40'). In this cords case the signal starts off at HDMI 1.3 and exits at HDMI 1.2 (which is excellent for anything over 40' in length, not alone 65'). Now that we have a cable that can deliver the signal, the second part of the equation is the signal transmitter (example: cable box, ps3, xbox360, computer, etc.). I have dish network and the signal from our cable box is strong enough but it is newer and only 18 months old so an older box may not be able to do it, but you are not out of luck because there are small AC adapters that can be attached at the transmitting end which will almost guarantee the signal will work, the reason I am saying this is because I know the PS3 does not start with the signal strength needed to get through 65' but with a $20 signal booster adapter it works fine. This company Accell does make even a better cord with a signal booster built in but that cord is about $35 more and it might not be necessary. If a booster is needed you can get one for $20 (online) instead so it's a win-win. With this cord you know one part of the equation is solved and all you have to do is work on the second part which will most likely need nothing but to plugged in! There's nothing more frustrating than trying to figure out why you can't get a picture but its nice to know that if it doesn't work you know its not the HDMI cord. The reason I said it wasn't prefect in the beginning was because it won't transmit the weaker PS3 or Xbox360 signal 65' without an AC signal booster (if it did it would be prefect but no cord this long can do it). Oh and one more thing, this cord is rated by UL (Underwriters Laboratory) that's what really sold me because if you know who they are you will know that if they put their stamp of approval on it, it's a no brainer that it will work:) Hope this helped.

Click Here to see more reviews about: Accell) B041C-025B-43 CL3 UltraAV HDMI/HDMI Cable (25 Feet/7.5 Meters)

UltraAV HDMI Cable 7 meter Boxed

Buy NowGet 65% OFF

Click here for more information about Accell) B041C-025B-43 CL3 UltraAV HDMI/HDMI Cable (25 Feet/7.5 Meters)

Read More...

Saturday, February 23, 2013

Hauppauge 1212 HD-PVR High Definition Personal Video Recorder Review

Hauppauge 1212 HD-PVR High Definition Personal Video Recorder
Average Reviews:

(More customer reviews)
To start off, I'm writing this review solely from the perspective of someone using this to record footage from video game consoles (an Xbox 360, in my case), because that's why I bought it and that's all I've used it for so far.
Upon opening the box, I was pleasantly surprised to discover that there was a component cable included, a nice bonus. The first thing you'll notice is how light the device itself is. The all-plastic body and the lack of weight contribute to give it a slight cheap feeling, but this is not reflective of the overall quality of the device, as I'm about to explain.
The HD PVR has pass-through outputs, which means you can plug your console into the PVR and then the PVR into your TV (with the included component cable), eliminating the need to split the signal. I was a little bit worried about any input lag caused by the pass-through, but I was thankful to discover that there is absolutely none. The one downside of this, if any, is that the PVR has to be on for the pass-through outputs to work. It doesn't have to be recording and the software doesn't have to be open, so it's not that big of a deal, but it's just one more device that is sapping power.
After getting everything hooked up, you have to install the included software on whatever PC you're going to be using to record. The software installation was pain-free, although I recommend getting the latest driver updates from their website and the latest software updates through the software itself. Make sure that you do NOT lose the CD, as you can only download the driver from Hauppauge's website, not the included software. One of the downsides of the PVR is that only the included software and a small list of 3rd party software will work with the device. Luckily, this isn't that big of an issue as the included software works great, with minimal issues.
One of the great things about the HD PVR is that it does all of the H.264 encoding on the box itself. In other words, you won't need a high-end PC to record in HD because the HD PVR does all of the heavy processing. You will need a high-end PC to watch and edit HD video, however. Unless you're just archiving or using the PC as a storage device (and then accessing the recorded videos on your 360, for instance), you're going to want a high-end PC to edit and playback the video that you record. There's simply no getting around this: if you want to produce videos in HD, you're going to need the tools for it.
The preview window provides smooth, full-quality video. There is a significant amount of lag between the source and the software preview window, however. If you were hoping to sit at your PC and play by watching the preview window, you can forget it. The input lag will make it impossible.
Overall, the video and audio quality are excellent. This will produce video miles beyond any SDi capture card you have. The device will record in whatever format you input (1080i, 720p, etc.). I would recommend going with 720p over 1080i. The lack of interlacing outweighs the gain in resolution, in my opinion (unless you're taking a screenshot or taking video with little movement). It support frame rates up to 60fps, maybe beyond. Call of Duty: Modern Warfare 2 in 720p at 60fps looks absolutely beautiful. The device lets you change the bitrate from 1MBps to 13.5MBps, so you can increase the quality of the video and sacrifice a small file size, if you wish. I find 8MBps to be a good balance. It allows you to fit 1 - 1.5 hours into around 5GB, and it still provides video that's good enough for YouTube HD uploads and similar casual usage. If you're going for production-quality video with almost no compression artifacts, you can easily increase the bit rate, but you're going to pay for it in file size and the power it requires to process.
All video is encoded in H.264. The software lets you record in 3 container formats: .TS, which is a generic 'transport stream' compatible with many digital media players; .M2TS, which is compatible with the Sony Playstation 3; and .MP4, which is compatible with the Xbox 360. These are somewhat-confusingly labeled "AVCHD", "PlayStation 3", and "Xbox 360" in the software, respectively. It's important to note that *this has nothing to do with what you're recording from* - it only has bearing on what device you want to play back the recorded footage. The MP4 format will play back on an Xbox 360, while the other formats will not. I recommend choosing the format that works best with whatever software you're going to use to edit the video, or whatever device you plan on using to watch the video. Note that most software will be able to open/edit an MP4 file, while I've found less compatibility with the other formats. If you plan to burn footage to Blu-Ray disk, though, go with .TS, as it's the format used on Blu-Ray disks and so your video won't require any transcoding, which is very nice (you can burn a Blu-Ray disk in just a few minutes).
If you don't want your footage encoded in H.264, there is an included converter program that can convert to variety of formats, but I haven't tried it yet, so I can't tell you how well it works.
The only two minor issues that I've had have involved the software. Sometimes the capture program will not recognize the device, requiring you to unplug it from the computer and plug it back in, at which point it should work normally. It's not that big of an issue, and it may be specific to my computer, but it's worth noting.
Secondly, the included playback application, TotalMedia Theater, causes a hard reboot whenever I try to start it. This also isn't that big of a deal because there's lots of other software that can play back the recorded files. Based on searches in which I've found only a couple of mentions about the problem it appears to be a very rare issue, but it's still worth noting. (I'm using Vista 32-bit, for reference).
Overall, the HD PVR is great for recording footage from hi-def consoles like the 360 and PS3. It's easy to use, doesn't require an insanely powerful PC, and produces good-quality video and audio in a good format at a reasonable file-size. Although the price is a bit steep, it's worth it if you really want to record high-quality, high-definition game footage from your 360 or PS3. If you have any questions, feel free to post them in a response and I'll try to answer them as best as I can.


Click Here to see more reviews about: Hauppauge 1212 HD-PVR High Definition Personal Video Recorder

The HD-PVR from Hauppauge is the world's first High-Definition video recorder for making real-time H.264 compressed recordings at resolutions up to 1080i. HD-PVR records component video from cable TV and satellite set top boxes, with a built-in IR blaster to automatically change TV channels for scheduled recordings. Audio is recorded using AAC or Dolby Digital. The recording format is AVCHD, which can be used to burn Blu-ray DVD disks. Two hours of HD recordings, recorded at 5 Mbist/sec, can be burnt onto a standard 4.7 GB DVD-R or DVD-RW disk for playback on a Blu-ray DVD player. The HD PVR's amazing recording quality allows personal archival recordings of your favorite high definition TV programs from any component video HD set top box. The HD PVR also has standard definition composite and S-Video inputs so you can record your old home video tapes into an AVHCD format for creating Blu-ray recordings. Other features include recording high definition video at up to 1080i resolution, 720P or VGA/D1. Includes HD software video player so you can playback recordings to your PC screen. NTSC, PAL, and SECAm support. IWorks with Windows XP and Vista.

Buy Now

Click here for more information about Hauppauge 1212 HD-PVR High Definition Personal Video Recorder

Read More...

Thursday, February 21, 2013

Marantz SR8002 Surround Receiver Review

Marantz SR8002 Surround Receiver
Average Reviews:

(More customer reviews)
After 9 years, it was time to upgrade my former top-of-the-line Sony ES receiver (STR-DA 777ES) to take advantage of improved audio and high-definition video switching. After reading all the professional reviews, I settled on the Marantz SR8002. Three weeks after an extensive configuration and testing, I must say that I am pleased overall with my choice. However, several surprising configuration limitations keep me from giving it a full-on 5-star review.
Let me preface my review by stating that my home theater / audio configuration is on the higher-end of the scale: 3 KEF Reference speakers for the front 3 channels, Boston Acoustics rear surrounds and subwoofer, Sony ES SACD player (and yes, I have an SACD collection!), Bang & Olfusen turntable, Sony reference DVD player, AppleTV, Roku music server, JVC SVHS VCR, Mitsubishi HDTV monitor.
My first priority was in upgrading the audio quality, and I must say that in this respect, the Marantz SR8002 far exceeded my expectations. As a 7.1 channel amplifier, there are 7 x 125watt channels available, native decoding of the latest lossless HD digital audio on BluRay (DTS-HD and Dolby TrueHD), Audyssey microphone and room equilazation, and THX Select 2 certification. For the ultimate audio experience, the Marantz SR8002 offers two "Pure Direct" modes - the first one bypasses the equalization and surround circuits, the second mode completely disables all video and display logic for even shorter audio output path. The SR8002 also provides a toroidal power transformer for extra headroom when needed, and in my setup the audio performance is dramatic.
I chose not to expand my current 5.1 speaker configuration to 7.1 channel. In this setup, the SR8002 gives you the option of taking the two unused channels and configuring them for a second amplified room/zone, or bi-amplification of your front speakers. I chose the latter, as my KEF Reference speakers support bi-amplified wiring, providing 250 watts per channel into Left and Right channels. Let me tell you - the pure stereo performance in this configuration will blow your socks off! Friends could not believe the sound in our fairly large family room was from 2-speakers only. And, the multi-channel modes (especially NEO6: Music) are quite outstanding even with a 2-channel source. Quite simply, the audio performance of the SR8002 is "7-star" on a 5-star scale.
My second priority was in upgrading to a receiver capable of decoding the high-resolution audio of BluRay, while providing high definition video switching (via HDMI and component). In this respect the receiver delivers, but with some surprising limitations. On paper, the Marantz SR8002 offers more connectors and options than you would ever need. You have 4 HDMI 1.3 connections + 2 HDMI 1.3 outputs (good!), 4 component HD connections + 2 component HD outputs (good!), 4 TOSlink digital audio (including front), 3 coax digital audio, and a plethora of S-video, composite video, and analog audio inputs.
But in reality, there are serious limitations...
First of all, it is inexcusable for a receiver of this cost to be missing a phonograph input. Yes, for $50 you can buy a phono preamp that gives you good performance and doesn't have the A/C hum of your $25 Radio Shack unit. But, come on.
Secondly, and more discouraging, despite the plethora of connections you only have 8 discrete settings that can be assigned. (The AM/FM tuner is another, nonassignable input, as is the optional XM radio input). This means that even if you could connect to all of the analog + digital inputs available you can only use 8 of them! This is quite a surprising and serious limitation. Even my Sony ES from 1999 had 12 discrete inputs!
The on-screen receiver setup lets you assign specific HDMI, component, and digital audio for your 8 choices. Each input can also be renamed. But you cannot use a single digital input for more than one setting. And you cannot reassign the analog video (S-Video/Composite) or analog audio inputs.
An example of this strange limitation is the analog input of the "AUX2" input also happens to be used as the Left and Right input channels for the 7.1 input. I had to reconfigure my setup to reassign the "AUX2" input to the digital CD input, which I also connected to the 5.1 (SACD) output from my CD player. Because there are only 8 input settings, I had to assign the "AUX1" (front) input to the digital audio and video inputs from my AppleTV. This means that the front AUX1 inputs are completely unusable, since all 8 inputs were assigned from rear input sources.
Another big surprise was the subwoofer speaker setting. By default, it is set to "mix"...all bass output is diverted to the subwoofer at an assignable crossover frequency. This works well for (and is recommended for) THX and multi-channel video sources. But strangely in "mix" setting, the SR8002 does NOT output the bass to the subwoofer for two-channel analog inputs AND it does not output the low frequencies to the front speakers. I spent about 3 hours trying to figure out why my new (required) phonograph preamp sounded so terrible before I discovered this problem. Setting the subwoofer to "BOTH" properly sends full-range audio to the front speakers. AND, it enables the subwoofer for the simulated modes such as NEO6. Not only does this not make sense, it is not documented anywhere in the manual.
There are other annoyances:
- FM / AM radio reception is below average. I was looking forward to trying the "HD radio" capability, but the tuner reception is so bad that it can never get a strong enough signal to use any of the HD radio broadcasts in my area. Compared with my 1999 Sony ES receiver using the same antenna configuration I can only tune half of the stations. My CLOCK RADIO gets much better radio reception than this $2000 receiver!
- the front of the receiver has two large controls for Source and Volume - each one has a bright blue LED indicator that does NOT move with the control. So, while you might think that the volume indicator would indicate the volume level it doesn't. The bright blue indicators are always at 12-o clock position. And the front input control does not have a positive feedback to let you know you have switched inputs.
- the remote control button/display backlight is ONLY activated when you press one of the two buttons on the bottom of the remote
- the remote does not offer discrete settings for all surround modes or settings (although thankfully there are discrete power on/off codes)
- the onscreen display is very primitive (think 1982 Apple ][+ 40x24 characters)
In summary, despite the outstanding audio performance of the Marantz SR8002 (once you figure out the subwoofer and other settings!), I cannot give this a full 5-star rating because of the serious limitations and limited inputs.

Click Here to see more reviews about: Marantz SR8002 Surround Receiver

AV Surround Receiver

Buy Now

Click here for more information about Marantz SR8002 Surround Receiver

Read More...

Monday, February 18, 2013

Mitsubishi HC5500 1080p LCD Home Theater Projector Review

Mitsubishi HC5500 1080p LCD Home Theater Projector
Average Reviews:

(More customer reviews)
I bought this projector to replace a 6 year old Sharp 720p DLP projector. The primary reasons were the price, the $[...] rebate, and the excelent video processing chip (Reon-VX). The final straw that broke the camel's back was the fact the newer Blu-ray movies output 480P through the component video output (the Sharp didn't have HDMI).
Mine is hooked up using HDMI with Blu-ray and HD DVD players, projected to a 150" gray screen.
What can I say - the picture is excellent. The Sharp was incredible, and I would never have any complaints until I see in person what the 1080p projectors can do nowadays. It was immediately obvious this Mitsubishi has a sharper, more detailed, and better contrasted image. It has a slightly higher lumens output than the Sharp, and also better contrast.
Although the Sharp came very close to an average movie theater picture quality, this projector at the very least matches, and in many cases, exceed what one can see in an average theater. No complaints about the picture, but I am not some super-nitpicky videophile like some.
This projector has an electronic zoom/focus lens, so setting it up initially can be difficult. I made the mistake of hanging it up on the ceiling before making adjustments. The default zoom/focus levels made the picture extremely blurry, so I could not read the menu at all. It was also upside down for me, making things doubly difficult. I had to use the pictures of the menu in the manual in order to navigate around. Speaking of the manual -- it could use a lot of improvement (the section about the extra filter was buried in the back instead of the front, where there should be a series of steps detailing the initial setup). I just feel if it had a manual focus option, it would've cut my setup time by 75%.
To summarize, some things I wish this projector had:
- Manual zoom/focus option
- More brightness (lumens output). I have to to set the brightness to around 75% to see something to my liking.
- More intuitive menu structure
- Have more frequently used functions be on the remote vs. buried somewhere in the menus
- Better manual
I would've given this projector 4 stars, but given the incredible value (esp. with the rebate included), I think it deserves 5 stars.
Addendum: After poking around a little bit, it turns out there is another available rebate; this other one is $[...], but with a free lamp, which is most likely worth quite a bit more than $[...]. I chose the $[...]+lamp rebate instead...

Click Here to see more reviews about: Mitsubishi HC5500 1080p LCD Home Theater Projector



Buy NowGet 26% OFF

Click here for more information about Mitsubishi HC5500 1080p LCD Home Theater Projector

Read More...

Saturday, February 16, 2013

Premium 1.3 HDMI Cable PS3 HDTV Blu-ray 24k 25ft Review

Premium 1.3 HDMI Cable PS3 HDTV Blu-ray 24k 25ft
Average Reviews:

(More customer reviews)
Wonderful Great HDMI 1.3b Cable. Works amazing. Very responsive no loss in picture or sound quality. Great Product.

Click Here to see more reviews about: Premium 1.3 HDMI Cable PS3 HDTV Blu-ray 24k 25ft



Buy Now

Click here for more information about Premium 1.3 HDMI Cable PS3 HDTV Blu-ray 24k 25ft

Read More...

Saturday, February 9, 2013

HDMI 2M (6 Feet) Super High Resolution Cable - Male to Male Connection - Use with HDTV, PS3, XBOX, DVR, Cable, A/V, DVD Review

Read More...

Wednesday, February 6, 2013

Mitsubish WD73C10 73" 1080p 3D upgradeable DLP TV Review

Mitsubish WD73C10 73 1080p 3D upgradeable DLP TV
Average Reviews:

(More customer reviews)
First I purchased this TV from another MAJOR PC MANUFACTURE. Most importantly I am not a picky person looking at critiquing every feature. I mainly use this as a gaming set for a Xbox 360/Netflix and PS3 Blu Rays. I've done a little bit of tinkering with the settings and everything looks great.
All of my friends(10+) that I have show cased this to were like WOW WTF. I got on Live with COD: Black Ops and all were amazed how great it looked. Then I threw in Avatar and Kingdom of Heaven Blu Rays and sofar the only negative i've gotten was from a friend that has a 55" LED (None 3D) about it not being as bright as his. But he did say for the price and size he would have rather this TV and a stand for it. The wall thing is nice, but for 3D, size, and $$ for this he wouldn't have mind one bit. His wife on the other hand was just pissed how much more they payed and to her this looked better. I did tell all that the only downside would be having to replace the bulb for about $100 every 2-3 years and they were like so.
It does take about 30 secs I would say for the TV to warm up when you just turn it on and to show all the colors in their full glory. Also, when you switch to a different input it takes about 3-4 secs to switch over. My 32" Sony XBR behaves the same also.
when I take it off after gaming for a hot minute, the fan from what I can tell usually stays on for about a minute or two maybe to cool it down. I've had this set running from about 2pm-4am with friends gaming on Black Ops and never once did the TV shut down, shutter, colors go wack, etc. On average this set is on about 10 hrs a day str8.
I've yet to get my Free 3D glasses and Kit but once I do, I will make sure to update my review with those results. Already got 2 3D Blu Rays standing by.
**Got the 3D glasses in few days before Xmas! I first tried it out with COD Black Ops on the Xbox 360. Total time out the box and working was about 10 minutes. The glasses fortunately for me wasn't a problem after getting used to them for about an hour or so while gaming. The gaming experience was something like WOW! Aiming by actually looking down the sites on the various guns took some real getting used to, but once I did, I was back to my soso gaming.
3D movies I tried it out with Cloudy...Meatballs and Disney Christmas Carol. It was GREAT! I watched them with my grade school daughter who did not complain once about wearing the 3D Glasses. Now can I justify buying more 3D movies, nope. Only when they are on some good sales maybe then. But, I can most def. see this whole 3D tv thing more for gamers. Now if only they get some 3D games for the Kinect, Holy atomic pile, BATMAN!!!
All in all for the "everyday" user this TV is AWESUM!
4 Stars until I can review for the extra Star! Jus earned the 5th Star!


Click Here to see more reviews about: Mitsubish WD73C10 73" 1080p 3D upgradeable DLP TV



Buy Now

Click here for more information about Mitsubish WD73C10 73" 1080p 3D upgradeable DLP TV

Read More...

Saturday, January 19, 2013

Vivitek D511 2600 Lumen XGA HDMI 120Hz 3D-Ready Portable DLP Projector (White) Review

Vivitek D511 2600 Lumen XGA HDMI 120Hz 3D-Ready Portable DLP Projector (White)
Average Reviews:

(More customer reviews)
Great product! Owned this for 2 days now and love it! Got my Xbox 360, Wii, and computer all hooked up to this baby and am not looking back.
There is definatly a downside which I have mostly remedied, however, most people will not be able to. The thing is that this projector has NO AUDIO OUTPUT. Which is weird considering it has HDMI and such. This means if you connect something with the HDMI, you are stuck using the build in speaker for audio. Bummer. Also, if you connect using the y/r/w cables you are also stuck using the internal speaker, but if you have a stereo like I do, connect it to the stereo and run it to the projector. Not that the internal speaker sounds bad, it actually sounds great, but it's just not the best while watching home movies or gaming.
Great picture quality and projects and image of about 5 1/2' x 7'. Actually is slightly bigger, but roughly that size. I'm very happy with my projector.
UPDATE LOST ONE STAR*- Projector did not work today, first time since I bought it (6 monthsish). Ive mostly used it on economy setting. I hear a rattling like broken pieces of something, and after disassembling it, there might be a big problem. Projector wasn't dropped, hit or anything, it sits far above and out of reach. I now have to hopefully find a resolution, either something exploded inside, or bulb burst. Im 50/50 on which it is right now. Ill update ASAP
UPDATE TO UPDATE-5TH STAR RETURNED- So the reason is my bulb had exploded. First I was upset and believed it to be an equipment issue, but after realizing the extension cord I run this from was unplugged, I put 2 and 2 together. Cord unplugged while running (even in low power mode) will cause the bulb to not cool down while being around the already cool surroundings = BOOM goes the dynamite (bulb). So this was my bad (or another occupant), and not the projector. I'd give it 5 1/2 stars now for doubting it. Ha ha, enjoy and don't accidentally unplug this!!!!

Click Here to see more reviews about: Vivitek D511 2600 Lumen XGA HDMI 120Hz 3D-Ready Portable DLP Projector (White)

The Vivitek D511 SVGA/XGA digital projectors offer 2600 lumens of brightness, 3000:1 contrast ratio and DLP and BrilliantColor technologies for sharp, detailed images. These projectors are also 3D-ready to ensure future media content can be displayed. With a variety of functions and features, the Vivitek D511 will put your presentation in the spotlight.

Buy Now

Click here for more information about Vivitek D511 2600 Lumen XGA HDMI 120Hz 3D-Ready Portable DLP Projector (White)

Read More...

Friday, January 11, 2013

Sony HT-SS2300 Component Home Theater System Review

Sony HT-SS2300 Component Home Theater System
Average Reviews:

(More customer reviews)
I purchased a $1,200 system but returned it because it sounded horrible after it was home and connected. For that much money I expected a "Wow" effect, but was very disappointed.
So, back to researching what one store told me was not possible. I just bought a Blu-ray player that I am very happy with and a Sony 46" Z series LCD TV so I didn't want a system with a DVD player or Blu-ray player. I also didn't want a big receiver, big speakers, and a big subwoofer.
I found this system on Sony's website and came here to check the price. After much consideration I selected this system because of the sleek and small receiver and speakers.
After several hours of hiding speaker wires, splicing the subwoofer wire to add a segment of additional speaker wire so I could hide the subwoofer, adding OmniMount Satellite speaker stands and hooking up all the speakers I turned the system on.
I must admit I was very skeptical because this system was only a fraction of the price I'd spent on the system I returned. I put a DVD in and sat listening thinking this sounds great when all of a sudden the back surround speakers belted out sounds from the scene playing causing me to jump in shock. This was the "Wow" effect I was looking for when I first starting looking for a surround sound.
The TV, stand and components all look sleek and clean, not cluttered with a big receiver, big center speaker, etc. Set-up was easy and understanding the remote and receiver is very straight forward. If you have a Sony Bravia TV and/or DVD/Blu-ray player the receiver interacts with all of them and makes the operation brainless.
Oh, I also used very high speed HDMI cables to match the 120 Hz refresh rate of the rest of the system. My HD cable box has a regular HDMI cable on it and the picture and sound is incredible compared to what it was before I added this system.
I can't say enough about this system...definitely give this one a try before you buy a system three times this price. Hope this review helped if you are considering this system.
UPDATED AFTER ALMOST 3 MONTHS:
I have now been using this system for 3 months and still love it. I play Xbox 360 on this system and really appreciate the small nuances I get from the background...like in Bioshock which scared me even when I was expecting it.
Granted I don't run my system volume up over 23 - 25 (which I think also speaks to the quality of this product) so I don't hear the static mentioned in other reviews.
Seriously, I honestly believe this purchase along with the TV and Blu-ray is one of the best decisions quality and value wise I've made in a long time. Regardless of what you get if you can sit back and feel good about what you're seeing and hearing you made the right choice.


Click Here to see more reviews about: Sony HT-SS2300 Component Home Theater System



Buy Now

Click here for more information about Sony HT-SS2300 Component Home Theater System

Read More...

Wednesday, January 9, 2013

HDMI Cable - 2 Male Connectors - 6ft. (1.8 Meters) Review

HDMI Cable - 2 Male Connectors - 6ft. (1.8 Meters)
Average Reviews:

(More customer reviews)
It's cheap, it works. "2 male" connectors. Yup, that's what the $40 HDMI cables use, too. I have it hooked to my TV. (tv: http://www.amazon.com/gp/product/B0039RRCJ8)


Click Here to see more reviews about: HDMI Cable - 2 Male Connectors - 6ft. (1.8 Meters)



Buy Now

Click here for more information about HDMI Cable - 2 Male Connectors - 6ft. (1.8 Meters)

Read More...

Tuesday, January 1, 2013

Mediabridge Ultra Series - High Speed HDMI Cable With Ethernet - Category 2 Certified - Supports 3D & Audio Return Channel - (15 Feet) Review

Mediabridge Ultra Series - High Speed HDMI Cable With Ethernet - Category 2 Certified - Supports 3D and Audio Return Channel  - (15 Feet)
Average Reviews:

(More customer reviews)
So far I have bought a total of four HDMI cables, in lengths ranging from 3' to 15'. I bought the 3' cable first. It was made by Philips and sold by the most gigantic of all gigantic discount Marts. It worked fine, and it would have been long enough except it was so stiff I could never straighten it out completely. I returned it.
I did some research on Amazon and found these Mediabridge cables with astounding user ratings and amazingly reasonable prices. Not the sub-dollar junk you can also find here, but less than one third the big-box price of the Philips cables in equivalent lengths. I bought two of the 6' cables to connect my two 1080p upconverting DVD players (a Sony 5-disc changer and a Philips region-free single-disc for playing foreign DVDs) to my wonderful (and cheap) AOC HDTV.
I was a little reluctant to buy 6' cables because I only really needed 3', and I know cable length can be tricky with very high-speed signals, but since the Philips 3' wasn't actually usable to that length, and I didn't want to have to return these, I ordered 6'. They work like a dream. They're as flexible as cooked spaghetti and transmit the signals without a single glitch.
Then I bought a new HP laptop with an HDMI output, but to work comfortably the cable had to be longer than 6'. I figured I'd go all the way and order the 15', since it's only marginally more expensive and would allow me to use the HDTV easily for watching streaming movies from Netflix. This cable also works like a dream.
My TV only has two HDMI inputs, so I do a fair amount of plugging and unplugging, with no signs of reliability problems so far. I highly recommend these Mediabridge HDMI cables--in any length--to anybody needing one.
I'm also very impressed with Mediabridge itself. Each cable comes very nicely packaged individually in a sturdy corrugated box, which is put into a larger box for shipping, and they ship quickly directly to the customer. What a relief not to have to saw through a hard plastic shell to get the product out! It's an impressive company. PLUS, they're an American company, and although I don't know if they manufacture the cables domestically, they're unafraid to print their New Jersey street address right on the box.

Click Here to see more reviews about: Mediabridge Ultra Series - High Speed HDMI Cable With Ethernet - Category 2 Certified - Supports 3D & Audio Return Channel - (15 Feet)



Buy NowGet 80% OFF

Click here for more information about Mediabridge Ultra Series - High Speed HDMI Cable With Ethernet - Category 2 Certified - Supports 3D & Audio Return Channel - (15 Feet)

Read More...

Sunday, December 16, 2012

Monster MC 900HDBR-1M Advanced High Speed HDTV HDMI Cable (1 meter) Review

Monster MC 900HDBR-1M Advanced High Speed HDTV HDMI Cable (1 meter)
Average Reviews:

(More customer reviews)
There is no reason to spend this much money for an HDMI cable. A $5-10 cable will perform EXACTLY as this cable will. Monster Cable is the biggest ripoff in the industry.

Click Here to see more reviews about: Monster MC 900HDBR-1M Advanced High Speed HDTV HDMI Cable (1 meter)

Get Maximum Performance from Your High Definition Home Theater. Blu-ray is the ultimate way to enjoy movies and games in higher definition. But to experience the advantages of true higher definition, you need a cable that can deliver an ultra-accurate digital signal from your Blu-ray Disc player to your HDTV. The Monster Blu-ray for HDMI 900 cable is engineered to bring out every detail of higher definition Blu-ray movies and more. You'll see crisp, clear 1080p video with Deep Color for a vivid, lifelike picture. And you'll hear the difference in lossless digital surround sound that puts you right in the middle of the action. Hook up with Monster HDMI 900 to experience the incredible excitement of Blu-ray.

Buy Now

Click here for more information about Monster MC 900HDBR-1M Advanced High Speed HDTV HDMI Cable (1 meter)

Read More...